Madness Sale 20% OFF On All Orders * Limited time only.

Tips And Tricks For Applying Epoxy Coatings



Applying epoxy coatings can be a tricky business. Done incorrectly, the coating could begin to peel or chip away prematurely. But if done correctly, you’ll have a beautiful floor that will last you many years. In this blog post, we will explore some tips and tricks for applying epoxy coatings correctly so that you can get the job done right the first time. From prepping and cleaning your surface to laying down the epoxy evenly, read on to learn more about how to apply epoxy coatings like a pro!


When working with epoxy resin, it is important to take the necessary precautions and mix the resin properly in order to avoid any accidents. Here are some tips for preparing epoxy resin mix:

-Read the manufacturer's instructions carefully before mixing the epoxy resin. This will ensure that you are using the correct proportions of resin and hardener.

-Mix the epoxy resin and hardener in a clean, dry container. Stir slowly and thoroughly until the two components are fully combined.

-If you are adding any colorants or other additives to the epoxy mix, do so now and stir well to distribute evenly.

-Once the epoxy mixture is ready, it should be used within a few hours. If it starts to thicken or become difficult to work with, it has probably begun curing and should be discarded.



When it comes to epoxy resin mix, there are a few things you need to keep in mind in order to get the best results. First of all, make sure that the surface you're applying the epoxy to is clean and free of any debris. If there's any dirt or grime on the surface, it will prevent the epoxy from adhering properly.

Once the surface is prepped, you'll need to mix the epoxy according to the instructions on the packaging. Once it's mixed, apply it to the surface using a brush or roller. For best results, use a gentle back and forth motion when applying the epoxy.

After you've applied the epoxy, allow it to cure for the amount of time specified on the packaging. Once it's cured, you can then add any finishings touches like paint or decals.



When it comes to cleanup and curing epoxy resin mixes, there are a few things you need to keep in mind. First and foremost, always read the instructions on your specific epoxy resin mix before beginning the cleanup process. Depending on the type of epoxy resin mix you're using, the cure time can vary significantly. For example, some epoxy resin mixes will need to be cured for 24 hours while others may only need 2-3 hours. It's important that you allow enough time for the curing process to take place so that your final product is strong and durable.

Once you've mixed your epoxy resin according to the instructions, you'll need to apply it to your surface. If you're working with a large area, it's best to use a roller or brush to evenly distribute the epoxy resin mix. Once you've coated your surface, any excess material can be removed with a putty knife or similar tool. Again, depending on the type of epoxy resin mix you're using, it's important to give it enough time to cure properly before moving on to the next step.

After your epoxy resin mix has cured, you can then begin the process of sanding and polishing your surface. This is where having patience really pays off - taking your time during this step will result in a much smoother and more professional looking finish. Once you're satisfied with the results, all that's left to do is admire your handy work!



Applying epoxy coatings is an excellent way to protect surfaces from wear and tear. By following the tips and tricks outlined in this article, you should be able to achieve a quality finish with minimal effort. With the proper planning, preparation of the surface, selection of the correct materials and application tools, your projects can last for years to come. Whether it's a countertop or flooring project – make sure to use epoxy coatings for unbeatable protection!


By Primo Resin


Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page